Product Description

XCMG factory XL2103 Road construction machine soil stabilizer.

The soil stabilizer applies to site mixing operation of stabilized oil in substratum and bottom stratum during highway, city road, square, wharf and parking lot engineering etc.It allows also mix-in-place of differentproportion of lime ash soil,lime fly ash stabilized aggregate ,stabilized gravel, etc.

Performance Characteristics:

* The machine adopts WP12 series electronic fuel injection engine, this engine has low emission and noise; the engine has some advanced functions like online display, diagnosis, and fault warning.

* Drive system adopts engine +transfer case, the transfer case connects the rotor pump, walking pump and auxiliary pump.

* Work rotor is driven by high speed motor and speed reducer, work rotor uses Kennametal tool bit and the tool holder, the rotor layout is independent designed,reasonable and ensuresevenly mixing, etc.

* Travel system: front axle steering, rear axle, drive axle has two gears, high speed used for traveling, low speed used for operation. The low pressure wide base deep tread tyres are installed in the drive axle, this tyre has big adhesive force and strong anti slip ability.

* This cab uses wide structure, installs the heating and air conditioner equipped with fan device, Mp3 and radio,comfortable operating.

Product parameters

Item	Unit	XL2103
Mixing width	mm	2100
Max. milling depth	mm	0~400
Rotor diameter	mm	1280
Min. turning radius	mm	7100
Manufacturer		Weichai
Cooling mode		Water cooled+ air intercooling
Type		WP12.400N
Air cylinder number		6
Rated power	kw	294
Rated speed	rpm	1900
Max. fuel consumption rate	g/kW.h	207.6
Electrical system		24V
Working speed	km/h	0~3
Travelling speed	km/h	0~23
Theoretical gradeability (working gear)	%	20
Ground clearance	mm	450
Fuel tank	L	450
Hydraulic oil tank	L	450
Machine mass	kg	15600
Front axle mass	kg	3200
Rear axle mass	kg	12300
Mechanical (length x width x height)	mm	8740*2765*3450

 

Company Profile

Payment Terms︰ L/C, T/T, D/A, D/P, Western Union

Lead Time︰ 7-30

Standards Certificate︰ CE, ISO, Gost, EPA(USA)CCC

Product Image