Product Description

XCMG official XMR403 4ton asphalt roller small road roller compactor roller price

XMR403 is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.

Performance Characteristics:

* Closed hydraulic drive system is adopted to realize stepless speed change.

* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.

* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.

* Large ground clearance and curb clearance, strong trafficabilit, good edge compaction performance.

* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.

* High frequency vibration and excitation force design, high working efficiency, good compaction effect.

* This machine has also the air intake preheating function, can realize low temperature cold start.

* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.

* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ℃.

Product parameters

Item	Unit	XMR403
Operating mass	kg	4000
Static linear load (front drum/rear drum)	N/cm	157/157
Vibrational frequency	Hz	60
Amplitude	mm	0.41
Exciting force	kN	42
Vibrating drum (Diameter x width)	mm	800x1300
Theoretical gradeability	%	30
Operating speed	km/h	0~10.6
Wheel base	mm	1920
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius	mm	3062 / 4362
Minimum ground clearance	mm	348
Engine type		ZN490B
Rated power	kW	36
Rated speed	r/min	2600

Company Profile

Payment Terms︰ L/C, T/T, D/A, D/P, Western Union

Lead Time︰ 7-30

Standards Certificate︰ CE, ISO, Gost, EPA(USA)CCC

Product Image